Audi RS3 with DTE Systems chip tuning develops 410 PS and 557 Nm

The chip tuning wizards at DTE Systems are back with an upgrade program tailored to the already powerful Audi RS3 Sportback.

The RS3 in its standard configuration is a 367 PS & 465 Nm five-cylinder brute thanks to a turbocharged 2.5-liter engine, but DTE Systems has applied its chip tuning knowhow to squeeze more power. They were able to extract an additional 43 PS (32 kW) and 92 Nm (68 lb-ft) for a grand total of 410 PS (301 kW) and 557 Nm (411 lb-ft) of torque.

As a result of the added oomph, the Audi RS3 Sportback now needs 1.1 seconds less to complete the 62 – 99 mph (100 – 160 km/h) task. This was achieved by implementing the tuner’s PowerControl SNT module connected to the central sensors of the engine management system, turbo pressure, and intake manifold. All the incoming signals are processed, optimized, and then transmitted to the motor’s ECU to enable the significant power hike.

A similar power boost program courtesy of the TÜV-approved PowerControl SNT tuning chip is available for a wide variety of Audi and Porsche models, including the RS Q3, RS6 & RS7, S4 & S5, Macan S & Turbo, Cayenne S & GTS, and the Panamera S.

Be the first to comment

Leave a Reply

Your email address will not be published.


*


Time limit is exhausted. Please reload CAPTCHA.